Hiring a Bouncy Castle on Concrete or Tarmac
Yes, you can hire a bouncy castle to be set up on concrete or tarmac. Safety and stability are the priorities. Hard surfaces need specific measures. This page explains the process, risks, and what to expect from Edinburgh Event Company. ⚠️🏰
How we secure inflatables on hard surfaces
- * Anchoring with Thunder Bolts
We use 10mm thunder bolts to securely anchor the inflatable to the ground. This process involves drilling small 10mm holes into the concrete or tarmac to provide the necessary stability and prevent movement during use.
- Anchoring method: We drill 10mm holes and fit heavy-duty bolts. 🔩
- Stability: Anchors stop movement from wind or active play. ✅
- Installation checks: We confirm secure fixings and inflate to safe pressure. 🛠️
Surface requirements
- Solid concrete base required. The surface must be stable and level. 📏
- Uneven or damaged areas may be unsuitable for anchoring. Do not assume all hard surfaces are acceptable. ⚠️
- We inspect the surface before setup to confirm suitability. 🔍
Post-installation repairs
- Minor holes remain after bolt removal. These are small 10mm holes. 🕳️
- We can fill holes with an appropriate filler if requested. Filling may not fully restore the surface to its original state. 🧰
- Expect visible repairs in some cases. We advise realistic expectations for final finish. 🏗️
Important consideration — liability
Edinburgh Event Company cannot be held responsible for any damage caused to concrete or tarmac during installation or removal. By hiring our services for this setup, you acknowledge and accept this policy. This includes drilling for anchors and any consequential surface changes. 📜
Health and safety
- Main services: Health and safety focused setup and inspection. 🩺
- Risk assessments completed for hard-surface installations. ✔️
- Qualified staff use industry-standard fixings and PPE. 👷
- Equipment checks before and after each hire to maintain safe operation. 🔎
- £50 per unit
Cost Per Unit & Time
- £50 per unit up to 12 fixings,
- Please allow an additional 45 minutes per unit for the work to be completed.
Conclusion
Setting up a bouncy castle on a hard surface demands careful planning and the right equipment to guarantee a safe and enjoyable experience for everyone involved. By following these guidelines, including adhering to BS EN 14960 regulations regarding anchor weights and matting, and considering power supply limitations, you can be confident your inflatable will be securely anchored and ready for action regardless of the surface.
At The Edinburgh Event Company, we’re committed to providing high-quality, durable inflatables and expert advice to ensure your event’s success. Whether you’re setting up on grass slabs decking or car parks we have the products and expertise to guide you every step of the way. Happy bouncing! If you’re unsure about your surface’s suitability our team can advise on its appropriateness and safety checks. We provide clear information on anchoring procedures potential surface impacts and health and safety measures ensuring your event runs smoothly and safely. 🎉
